What are the precautions you should take while cleaning the pool?
A clean swimming pool with Polaris robotic cleaner is synonymous with healthy water and a beautiful look for the outdoor area.
Therefore, the pool cleaning routine must be followed to prevent dirt from accumulating and causing inconveniences, such as algae or cloudy water.
Here we give you points which you need to take into consideration:
Check the pH and alkalinity:
The pH and alkalinity levels also need to be controlled and are one of the basic rules for maintaining healthy water. Therefore, the cleaning of the pool will not be complete if you do not check these parameters and correct them if necessary.
For pH and alkalinity, we also use a kit that shows the levels of both. For pH, the result must be between 7.2 and 7.6. Higher or lower, it can cause discomfort for the skin and eyes. You can also use the pool ionizer system.
The alkalinity must be between 80 and 120 ppm because if it is lower or higher it will cause imbalances in the water.
When alkalinity is too low it makes the water corrosive, it can turn green or opaque, the pH is deregulated and it becomes more difficult to decant particles.
But when the parameters are too high, the alkalinity leaves the water cloudy, and incrustations can form in the pipes, which increases the cost of maintenance.
When pH and alkalinity are deregulated, less or more than ideal, it is necessary to correct with the pH lift or reducer. The same product corrects alkalinity.
Use the decanter and the vacuum cleaner weekly:
Once a week it is interesting to do a more thorough cleaning. Removing leaves and other residues is valid, however, some particles remain in the water, because the sieve cannot remove them.
If these particles are not eliminated, they will cause imbalances and make the water cloudy. So, we must use the decanter to make this dirt sediment and can be vacuumed.
The decanter is a product for cleaning the pool that reacts with the tiny particles of dirt, making them “heavy”. It separates them from the water leaving it crystal clear again.
After leaving the decanter to act, just use the bottom vacuum for the dirt to be removed successfully. In this process, you need to be calm and careful not to stir the water and mix the particles again.
If you are looking for a comprehensive service of the pool system, do not hesitate to get in touch with torontopoolsupplies.ca. We also deal in the two-stage home furnace and Jandy heater parts.
Therefore, the pool cleaning routine must be followed to prevent dirt from accumulating and causing inconveniences, such as algae or cloudy water.
Here we give you points which you need to take into consideration:
Check the pH and alkalinity:
The pH and alkalinity levels also need to be controlled and are one of the basic rules for maintaining healthy water. Therefore, the cleaning of the pool will not be complete if you do not check these parameters and correct them if necessary.
For pH and alkalinity, we also use a kit that shows the levels of both. For pH, the result must be between 7.2 and 7.6. Higher or lower, it can cause discomfort for the skin and eyes. You can also use the pool ionizer system.
The alkalinity must be between 80 and 120 ppm because if it is lower or higher it will cause imbalances in the water.
When alkalinity is too low it makes the water corrosive, it can turn green or opaque, the pH is deregulated and it becomes more difficult to decant particles.
But when the parameters are too high, the alkalinity leaves the water cloudy, and incrustations can form in the pipes, which increases the cost of maintenance.
When pH and alkalinity are deregulated, less or more than ideal, it is necessary to correct with the pH lift or reducer. The same product corrects alkalinity.
Use the decanter and the vacuum cleaner weekly:
Once a week it is interesting to do a more thorough cleaning. Removing leaves and other residues is valid, however, some particles remain in the water, because the sieve cannot remove them.
If these particles are not eliminated, they will cause imbalances and make the water cloudy. So, we must use the decanter to make this dirt sediment and can be vacuumed.
The decanter is a product for cleaning the pool that reacts with the tiny particles of dirt, making them “heavy”. It separates them from the water leaving it crystal clear again.
After leaving the decanter to act, just use the bottom vacuum for the dirt to be removed successfully. In this process, you need to be calm and careful not to stir the water and mix the particles again.
If you are looking for a comprehensive service of the pool system, do not hesitate to get in touch with torontopoolsupplies.ca. We also deal in the two-stage home furnace and Jandy heater parts.
Comments
Post a Comment